Small Form-Factor Pluggable Copper Range Extender Module
CL-SFP Series
Datasheet: 
The ComNet CopperLine® CL-SFP is a small form-factor pluggable Ethernet extender module that improves bandwidth and distance of existing copper networks. It helps avoid installation costs of new fiber lines on site by allowing full 10 Mbps or 100 Mbps Ethernet bandwidth to be extended over 2-wire twisted pair or coaxial cable. Housed in a small form-factor pluggable (SFP) module enclosure, it is designed for plug-and-play installation into any 100BASE-FX Ethernet unit with an MSA-compliant port. These must be used in pairs, with a CL-SFP module installed at both ends of the connection, or a CopperLine unit installed at one end.
Features for CL-SFP Series
- Extends Ethernet up to 3,000 feet (914 m) at 10 Mbps or 1,000 feet (305 m) at 100 Mbps over 1 pair UTP cable.
- Extends Ethernet up to 5,000 feet (1,524 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over Coaxial cable using the optional CLRJ2COAX or CLRJ2COAXCAB adapters.
- Automatic local/remote device selection ensures ultimate flexibility and ease of use.
- Small Form-Factor Pluggable (SFP) module can be plugged into any Ethernet switch with SFP ports that support 100BASE-FX*
- Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/ TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Applications
- Retrofit existing analog CCTV installations to Ethernet-based systems
- CCTV systems for casinos, airports, school campuses
CL-SFP Series Application Diagram(s) (2)
CL-SFP Series Ordering Information
| Part Number | Description |
|---|---|
| CL-SFP1 | 10 Mbps Copper Extended Distance SFP |
| CL-SFP3 | 100 Mbps Copper Extended Distance SFP |
| CLRJ2COAX | Adapter for RJ-45 to COAX |
| CLRJ2COAXCAB | Adapter Cable for RJ-45 to Coax |
* The ComNet Copperline CL-SFP modules are fully compatible with all ComNet Ethernet products supporting 100BASE-FX SFP modules. The modules cannot be used in ports that only support 1000BASE-FX SFP modules. Please contact ComNet technical support before purchasing this product if you intend to use it with any other 3rd party manufacturer in order to check compatibility.