Ethernet-over-Copper Extender With 30 W PSE PoE+

CL(L,R)FE(X)POE(C,U) Series

Example of Ethernet-over-Copper Extender With 30 W PSE PoE+
CopperLine®

Availability: Worldwide

PDF Datasheet: en  
pdfManual
DWG CAD
DOC A&E Specs

icon

-40º to +65ºC

icon

IEEE802.3af

icon

IEEE802.3at

icon

EXTENDER

icon

Made in the USA

icon

WARRANTY

icon

TAA Compliant

The ComNet CopperLine® Ethernet over copper CL(L,R)FE(X)POE(C,U) Series supports up to sixteen channels of 10/100Mbps Ethernet with PoE+ Power Injection and Pass-through PoE+ over twisted pair cable (CAT-5, UTP) or over coax. With the ability to connect directly to a PoE+ switch, or the ability to generate PoE+ power with a 48 to 56 V input* to either the Local or Remote ends, these units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. A complete set includes both a Local and Remote module. Remote units are available in small package sizes that include one or four channels, and Local modules are available in the same packages as well as a 1RU rack for larger channel counts.

Features for CL(L,R)FE(X)POE(C,U) Series

  • Full 10/100 Mbps Bandwidth
  • Supports Multicast, Unicast and Jumbo Frame
  • Symmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance
  • Type tested to RFC-2544 TCP/IP network bandwidth packet transmission standards
  • User-selectable data rate for maximum bandwidth and transmission distance utilization.
  • Complies with all major IEEE standards and RFC network protocols for UDP, TCP/IP, HTTP/HTTPs
  • Transmits individual Ethernet data channels with PoE+ Power Injection or Pass-through PoE+ over standard UTP or Coaxial cable
  • Status indicating LEDs provide rapid indication of critical operating parameters.
  • Extends Ethernet up to 3,000 feet (914 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over UTP cable
  • Extends Ethernet up to 5,000 feet (1,524 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over Coaxial cable
  • Extended Pass-through PoE meets the IEEE 802.3at standard for Power over Ethernet
  • ComFit standard form factor is interchangeable between stand-alone or rack mount use.
  • Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/ TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
  • Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data.

Applications

  • Retrofit existing analog CCTV installations to Ethernetbased systems
  • CCTV systems for casinos, airports, school campuses

CL(L,R)FE(X)POE(C,U) Series Application Diagram(s) (1)

Application Diagram(s) for CL(L,R)FE(X)POE(C,U) Series

CL(L,R)FE(X)POE(C,U) Series Ordering Information

Part NumberDescription
CLLFE1POEC1 Port EOC Ethernet Extender, Local, Small Size, Coax. Lifetime Warranty.
CLRFE1POEC1 Port EOC Ethernet Extender, Remote, Small Size, Coax. Lifetime Warranty.
CLLFE1POEU1 Port EOU Ethernet Extender, Local, Small Size, UTP. Lifetime Warranty.
CLRFE1POEU1 Port EOU Ethernet Extender, Remote, Small Size, UTP. Lifetime Warranty.
CLLFE4POEC4 Port EOC Ethernet Extender, Local, ComFit (1 Slot), Coax. Lifetime Warranty.
CLRFE4POEC4 Port EOC Ethernet Extender, Remote, ComFit (1 Slot), Coax. Lifetime Warranty.
CLLFE4POEU4 Port EOU Ethernet Extender, Local, ComFit (1 Slot), UTP. Lifetime Warranty.
CLRFE4POEU4 Port EOU Ethernet Extender, Remote, ComFit (1 Slot), UTP. Lifetime Warranty.
CLLFE8POEC8 Port EOC Ethernet Extender, Local, 1 RU 19" Rack Mount, Coax. Lifetime Warranty.
CLLFE8POEU8 Port EOU Ethernet Extender, Local, 1 RU 19" Rack Mount, UTP. Lifetime Warranty.
CLLFE16POEC16 Port EOC Ethernet Extender Local, 1 RU 19" Rack Mount ,Coax. Lifetime Warranty.
CLLFE16POEU16 Port EOU Ethernet Extender, Local, 1 RU 19" Rack Mount, UTP. Lifetime Warranty.

* Power Supply for PoE applications is sold separately. † One Channel Units Only. Multichannel units are designed to meet NEMA TS-2 Spec. Running multiple signals in the same twisted pair cable could affect signal quality and is not recommended.