Managed Ethernet Switch with (16) 10/100TX + (2) Configurable 10/100/1000TX / 100/1000FX Ports

CNGE2FE16MS

Example of Managed Ethernet Switch with (16) 10/100TX + (2) Configurable 10/100/1000TX / 100/1000FX Ports

Availability: Obsoleted (Click for Replacements List)

PDF Datasheet: en  
pdfManual
DWG CAD
DOC A&E Specs
Firmware: v3.00 k5.03.37

icon

DIN Rail

icon

INCLUDED ☞

icon

FLEXIBILITY

icon

16

icon

2

icon

WARRANTY

The ComNet CNGE2FE16MS Managed Ethernet Switch provides robust transmission of (16) 10/100 BASE-TX and (2) 10/100/1000TX or 100/1000FX combo ports of gigabit Ethernet data. Unlike most Ethernet switches, these environmentally hardened units are designed for direct deployment in difficult out-of-plant or roadside operating environments, and are available for use with either conventional CAT-5e copper or optical transmission media. Diverse media selection allows for easy implementation of point-to-point, linear add-drop, dropand-repeat, star, or true self-healing ring and mesh network system architectures. 2 ports are 10/100/1000 configurable for copper or fiber media for use with multimode or single mode optical fiber, selected by optional SFP* modules. These network managed layer 2 switches are optically (100/1000 BASE-FX) and electrically compatible with any IEEE 802.3 compliant Ethernet devices. Plug-andplay design ensures ease of installation, and no electrical or optical adjustments are ever required.

Features for CNGE2FE16MS

  • Electrical ports support 10/100/1000 Mbps Ethernet IEEE802.3 protocol
  • Rigid aluminum housing
  • Designed for wall or DIN rail mount installations
  • Environmentally hardened for direct deployment in difficult unconditioned out-of-plant and roadside installations
  • Compliant with EN60950-1 and UL Class 1, Division 2, Groups A, B, C and D for Hazardous Locations
  • Redundant power supply compatibility reduces possibility of single-point-of-failure for highest possible reliability
  • Fully configurable through web-based or SNMP network management
  • Rapid Spanning Tree protocol (IEEE 802.1W)
  • Power Supply Included
  • Port based VLAN (IEEE 802.1Q)
  • IGMP Snooping V1/V2 for multicast filtering and IGMP Query V1/V2
  • Uses customer-installed ComNet SFPs for compatibility with a wide range of optical fibers, optical connector types, and optical transmission distances (SFPs ordered separately).
  • Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
  • Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput

Applications

  • ITS Traffic Signalization & Surveillance/Incident Detection Networks
  • Industrial and Factory Automation
  • Integrated IP-Video and Data Transmission Networks
  • Industrial Security Access Control Systems

CNGE2FE16MS Ordering Information

Part NumberDescription

* Small Form-Factor Pluggable Module. Sold separately.