Environmentally Hardened Managed Ethernet Switch with (24) 10/100TX + (2) 10/100/1000TX / 1000FX RJ45 or 1000FX SFP Ports

CNGE2FE24MSPOE

Example of Environmentally Hardened Managed Ethernet Switch with (24) 10/100TX + (2) 10/100/1000TX / 1000FX RJ45 or 1000FX SFP Ports

Availability: Obsoleted (Click for Replacements List)

PDF Datasheet: en  es  fr  
pdfManual
DWG CAD
DOC A&E Specs
Firmware: v2.11 k5.82

icon

-40 º to +75 ºC

icon

FLEXIBILITY

icon

802.3af

icon

UPLINKS

icon

24

icon

2

icon

WARRANTY

The ComNet CNGE2FE24MSPOEPoE Managed Ethernet Switch provides transmission of (24) 10/100 BASE-TX and (2) 10/100/1000T(X) or 1000FX combo ports. Unlike most Ethernet switches, these environmentally hardened units are designed for deployment in difficult operating environments, and are available for use with either conventional CAT-5e copper or optical transmission media. The 24 electrical ports support the 10/100 Mbps Ethernet IEEE 802.3 protocol, and auto-negotiating and auto-MDI/MDIX features are provided for simplicity and ease of installation. All 24 ports support IEEE.802.3af Class 1 – 3 based Power over Ethernet (PoE). 2 ports are 10/100/1000 configurable for copper or fiber media for use with multimode or single mode optical fiber, selected by optional SFP modules. These network managed layer 2 switches are optically (1000 BASE-FX) and electrically compatible with any IEEE 802.3 compliant Ethernet devices. Plug-and-play design ensures ease of installation, and no electrical or optical adjustments are ever required.

Features

  • Environmentally hardened for direct deployment in difficult unconditioned out-of-plant and roadside installations
  • Redundant power supply compatibility reduces possibility of single-point-of-failure for highest possible reliability
  • Fully configurable through web-based or SNMP network
  • IGMP Snooping V1/V2 for multicast filtering and IGMP Query V1/V2
  • Port based VLAN (IEEE 802.1Q)
  • IEEE802.3af Class 1 – 3 PoE
  • Rapid Spanning Tree protocol (IEEE 802.1W)
  • Port Based Security
  • Rigid aluminum housing design provides for rack mounting
  • Uses customer-installed ComNet SFPs for compatibility with a wide range of optical fibers, optical connector types, and optical transmission distances (SFPs ordered separately).
  • Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
  • Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput

Applications

  • ITS Traffic Signalization & Surveillance/ Incident Detection Networks
  • Industrial and Factory Automation
  • Integrated IP-Video and Data Transmission Networks
  • Industrial Security Access Control Systems