2-Channel Digitally Encoded Video with 4 Bi-Directional Data Channels Multiplexer

FVT/FVR20141 Series

Availability: Worldwide

PDF Datasheet: en  
pdfManual
DWG CAD
DOC A&E Specs

icon

2

icon

4

icon

Made in the USA

icon

WARRANTY

icon

-40 º to +75 ºC

The ComNet FVT/FVR2014 video transmitter/data transceiver and video receiver/data transceiver series utilize 10-bit digital encoding and decoding for high-quality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units provide transmission of two independent video channels and four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support.

Features

  • Supports RS232, RS422, and 2 or 4-wire RS485 with tri-state data interfaces
  • Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
  • Ideally suited to networks requiring multiple physical layers where video degradation may be a problem
  • Robust design ensures extremely high reliability in unconditioned out-of-plant environments
  • Status indicating LEDs provide rapid indication of critical operating parameters.
  • Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
  • ComFit standard form factor is interchangeable between stand-alone or rack mount use.
  • Compatible with NTSC, PAL, or SECAM Video Standards
  • 10-bit digitally encoded short-haul video transmission meets the requirements of the EIA RS-250C standard.
  • Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/ TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
  • Standard ComFit models are hot-swappable.
  • Lifetime Warranty

Application Diagram(s) (1)

Application Diagram(s) for FVT/FVR20141 Series

Ordering Information

Part NumberDescription
FVT2014M1Video Transmitter/Data Transceiver (1310/1550 nm)
FVT2014S1Video Transmitter/Data Transceiver (1310/1550 nm)
FVR2014M1Video Receiver/Data Transceiver (1550/1310 nm)
FVR2014S1Video Receiver/Data Transceiver (1550/1310 nm)