Eight 10-bit Digitally Encoded Video Channels with Eight Bi-directional Data Channels + Redundant Point-to-Point Dual Small Form-Factor Pluggable (SFP) Optical Ports
FVT/FVR8SFP2RD8
Datasheet: 
CAD
A&E Specs
The ComNet FVT/FVR8SFP2RD8 series optical video link provides eight 10-bit medium-haul quality Digitally Encoded video channels, eight bi-directional data channels and has dual optical (SFP) ports to provide a redundant Point-to-Point topology. The redundant Point-to-Point topology using the dual optical ports provide fail safe operation in the event of loss of one fiber or one optical module. Each port accepts a wide variety of SFP modules. The data channels support RS232, RS422 and 2 wire and 4 wire RS485.
Features for FVT/FVR8SFP2RD8
- Dual optical ports (SFP) Redundant Point-to-Point configuration
- Automatic resettable fuses on all power lines
- Status indicating LEDs provide rapid indication of critical operating parameters.
- 8 Bi-directional data channels
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
- ComFit standard form factor is interchangeable between stand-alone or rack mount use.
- Compatible with NTSC, PAL, or SECAM Video Standards
- 10-bit digitally encoded short-haul video transmission meets the requirements of the EIA RS-250C standard.
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
- Standard ComFit models are hot-swappable.
- Lifetime Warranty
FVT/FVR8SFP2RD8 Application Diagram(s) (1)
FVT/FVR8SFP2RD8 Ordering Information
| Part Number | Description |
|---|---|
| FVT8SFP2RD8 | 8 Channel Video Transmitter, 8 Channel Data Transceiver |
| FVR8SFP2RD8 | 8 Channel Video Receiver, 8 Channel Data Transceiver |
☞ Power supplies provided in North America only. The power supplies provided with ComNet products are designed for benign 0 º to 50 ºC applications. Hardened power supplies are available; consult the factory to select the right power supply for your application.