10-Bit Digitally-Encoded Video with Bi-Directional Data + 10/100 Mbps Fast Ethernet

FVT10D1EM Series

Example of 10-Bit Digitally-Encoded Video with Bi-Directional Data + 10/100 Mbps Fast Ethernet

Availability: Obsoleted (Click for Replacements List)

PDF Datasheet: en  

icon

INCLUDED ☞

icon

-40 º to +75 ºC

icon

2

icon

CONVERTER

icon

Made in the USA

icon

WARRANTY

The ComNet FVT10D1EM/24VAC small-size transmitter and data transceiver support the simultaneous transmission of short haul quality 10-bit EIA RS-250C digitally-encoded video with one bi-directional data channel plus one 10/100 Mbps fast Ethernet port. The modules are universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces and most data protocols. It also supports “up-the-coax” data transmission from most major manufacturers. Packaged in the exclusive ComNet ComFit housing, the FVT/FVR10D1E standard size units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

Features

  • One bi-directional data channel
  • One 10/100 BASE-T/TX fast Ethernet port
  • IEEE 802.3 compliant
  • Certified to the requirements of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
  • Automatic resettable fuses on all power lines
  • Distances up to 30 miles (48 km)
  • Status indicating LEDs provide rapid indication of critical operating parameters.
  • Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
  • ComFit standard form factor is interchangeable between stand-alone or rack mount use.
  • Compatible with NTSC, PAL, or SECAM Video Standards
  • 10-bit digitally encoded short-haul video transmission meets the requirements of the EIA RS-250C standard.
  • Standard ComFit models are hot-swappable.
  • Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput
  • Lifetime Warranty

Application Diagram(s) (1)

Application Diagram(s) for FVT10D1EM Series

Ordering Information

Part NumberDescription
FVT10D1EMMMini-Video Transmitter/Data Transceiver
FVT10D1ESMMini-Video Transmitter/Data Transceiver

☞ Power supplies provided in North America only. The power supplies provided with ComNet products are designed for benign 0 º to 50 ºC applications. Hardened power supplies are available; consult the factory to select the right power supply for your application.