Eight 10-bit Digitally Encoded Video Channels + Redundant Point-to-Point Dual Small Form-Factor Pluggable (SFP) Optical Ports


Availability: Worldwide

PDF Datasheet: en  
DOC A&E Specs




-40 º to +75 ºC




Made in the USA



The ComNet FVT/FVR8SFP2R series optical video link provides eight 10-bit medium-haul quality digital video channels, and has dual optical (SFP) ports to provide a redundant Point-to-Point topology.
The redundant Point-to-Point topology using the dual optical ports provide fail safe operation in the event of loss of one fiber or one optical module. Each port accepts a wide variety of SFP modules.


  • Automatic resettable fuses on all power lines
  • Status indicating LEDs provide rapid indication of critical operating parameters.
  • Dual optical ports (SFP) Redundant Point-to-Point configuration
  • Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
  • Compatible with NTSC, PAL, or SECAM Video Standards
  • 10-bit digitally encoded short-haul video transmission meets the requirements of the EIA RS-250C standard.
  • Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
  • Standard ComFit models are hot-swappable.
  • Lifetime Warranty
  • ComFit standard form factor is designed for wall, surface, rack, or DIN rail mount installations (using optional card cage or DIN mounting bracket).

Application Diagram(s) (1)

Application Diagram(s) for FVT/FVR8SFP2R

Ordering Information

Part NumberDescription
FVT8SFP2R8 CH Video Transmitter with Redundant Point-To-Point Dual Small Form-Factor Pluggable (SFP) Optical Ports
FVR8SFP2R8 CH Video Receiver with Redundant Point-To-Point Dual Small Form-Factor Pluggable (SFP) Optical Ports

☞ Power supplies provided in North America only. The power supplies provided with ComNet products are designed for benign 0 º to 50 ºC applications. Hardened power supplies are available; consult the factory to select the right power supply for your application.