ComNet will be operating as usual with regard to the Corona Virus. We are monitoring the situation and will take every precaution necessary to protect the health and well-being of our employees, but we anticipate no interruptions in the production or delivery of our products. Read the full statement here (PDF)

Hardware Installation

There are many different factors that can dictate how the NetWave product is mounted. This section will cover the basic guidelines to have a successful installation.

  • Distance – It is recommended a 40 in / 102 cm buffer between APs. This includes APs and Clients mounted on the same wall or pole.
  • Cabling Requirements - Shielded outdoor CAT 5 or better should be used for all out of plant Ethernet connection and should be properly grounded through the PoE AC ground. Industrial grade shielded Ethernet cable is recommended to help prevent ESD damage commonly experienced with outdoor installations.

Please also refer to your product's specific installation manual.